English
English  |
| Association of Edison Illuminating Companies Specification (AEIC) | ||
| 1 | AEIC CS8 | Specification for Extruded Dielectric, Shielded Power Cables Rated 5 Through 46 kV |
| Australian and New Zealand Standard (AS) & Australian and New Zealand Standard (AS/ANS) | ||
| 1 | AS 1222 | Steel conductors and stays - Bare overhead |
| 2 | AS 1391 | Metallic materials - Tensile testing at ambient temperature |
| 3 | AS 1531 | Conductors - Bare Overhead - Aluminium and Aluminium Alloy |
| 4 | AS 1746 | Conductors - Bare overhead - Hard-drawn copper |
| 5 | AS 2848 | Aluminium and aluminium alloys - Compositions and designations |
| 6 | AS 3607 | Conductors -Bare overhead, aluminium and aluminium alloy - Steel reinforced |
| 7 | AS/NZS 1125 | Conductors in insulated electric cables and flexible cords |
| 8 | AS/NZS 1429 | Electric cables - Polymeric insulated |
| 9 | AS/NZS 1660 | Test methods for electric cables, cords and conductors |
| 10 | AS/NZS 1802 | Electric cables - Reeling and trailing - For underground coal mining |
| 11 | AS/NZS 1972 | Electric cables - Underground coal mines - Other than reeling and trailing |
| 12 | AS/NZS 2802 | Electric cables - Reeling and trailing - For mining and general use (other than underground coal mining) |
| 13 | AS/NZS 2857 | Timber drums for insulated electric cables and bare conductors |
| 14 | AS/NZS 3013 | Electrical installations - Classification of the fire and mechanical performance of wiring system elements |
| 15 | AS/NZS 3191 | Electric flexible cords |
| 16 | AS/NZS 3560 | Electric cables - Cross-linked polyethylene insulated - Aerial bundled - For working voltages up to and including 0.6/1 (1.2) kV |
| 17 | AS/NZS 3599 | Electric cables - Aerial bundled - Polymeric insulated - Voltages 6.35/11 (12) kV and 12.7/22 (24) kV Metallic screened |
| 18 | AS/NZS 3675 | Conductors - Covered overhead - For working voltages 6.35/11 (12) kV up to and including 19/33 (36) kV |
| 19 | AS/NZS 3808 | Insulating and sheathing materials for electric cables |
| 20 | AS/NZS 3863 | Galvanized mild steel wire for armouring of cables |
| 21 | AS/NZS 4026 | Electric cables - For underground residential distribution systems |
| 22 | AS/NZS 4961 | Electric cables - Polymeric insulated - For distribution and service applications |
| 23 | AS/NZS 5000 | Electric cables - Polymeric insulated |
| 24 | AS/NZS 5033 | Installation of photovoltaic (PV) arrays |
| ASTM Standard (ASTM) | ||
| 1 | ASTM A90 | Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings |
| 2 | ASTM A363 | Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand |
| 3 | ASTM A370 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| 4 | ASTM A475 | Standard Specification for Zinc-Coated Steel Wire Strand |
| 5 | ASTM B1 | Standard Specification for Hard-Drawn Copper Wire |
| 6 | ASTM B2 | Standard Specification for Medium-Hard-Drawn Copper Wire |
| 7 | ASTM B3 | Standard Specification for Soft or Annealed Copper Wire |
| 8 | ASTM B8 | Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft |
| 9 | ASTM B33 | Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes |
| 10 | ASTM B173 | Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors |
| 11 | ASTM B174 | Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors |
| 12 | ASTM B193 | Standard Test Method for Resistivity of Electrical Conductor Materials |
| 13 | ASTM B227 | Standard Specification for Hard-Drawn Copper-Clad Steel Wire |
| 14 | ASTM B230 | Standard Specification for Aluminum 1350–H19 Wire for Electrical Purposes |
| 15 | ASTM B231 | Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors |
| 16 | ASTM B232 | Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR) |
| 17 | ASTM B233 | Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes |
| 18 | ASTM B258 | Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors |
| 19 | ASTM B33 | Standard Specification for Tin-Coated Soft or Annealed Copper Wire for Electrical Purposes |
| 20 | ASTM B396 | Standard Specification for Aluminum-Alloy 5005-H19 Wire for Electrical Purposes |
| 21 | ASTM B398 | Standard Specification for Aluminum-Alloy 6201-T81 and 6201-T83 Wire for Electrical Purposes |
| 22 | ASTM B399 | Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors |
| 23 | ASTM B400 | Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors |
| 24 | ASTM B415 | Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire |
| 25 | ASTM B416 | Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors |
| 26 | ASTM B496 | Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors |
| 27 | ASTM B498 | Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors |
| 28 | ASTM B500 | Standard Specification for Metallic Coated or Aluminum Clad Stranded Steel Core for Use in Overhead Electrical Conductors |
| 29 | ASTM B502 | Standard Specification for Aluminum-Clad Steel Core Wire for Use in Overhead Electrical Aluminum Conductors |
| 30 | ASTM B524 | Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201) |
| 31 | ASTM B531 | Standard Specification for Aluminum-Alloy 5005 Drawing Stock for Electrical Purposes |
| 32 | ASTM B549 | Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced for Use in Overhead Electrical Conductors |
| 33 | ASTM B577 | Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper |
| 34 | ASTM B606 | Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced |
| 35 | ASTM B609 | Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes |
| 36 | ASTM B711 | Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201) |
| 37 | ASTM B779 | Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW) |
| 38 | ASTM B800 | Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes—Annealed and Intermediate Tempers |
| 39 | ASTM B801 | Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation |
| 40 | ASTM B802 | Standard Specification for Zinc–5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) |
| 41 | ASTM B856 | Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS) |
| 42 | ASTM B857 | Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW) |
| 43 | ASTM B911 | Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP) |
| 44 | ASTM B941 | Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes |
| 45 | ASTM D412 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers - Tension |
| 46 | ASTM D471 | Standard Test Method for Rubber Property—Effect of Liquids |
| 47 | ASTM D566 | Standard Test Method for Dropping Point of Lubricating Grease |
| 48 | ASTM D2765 | Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics |
| 49 | ASTM D2303 | Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials |
| 50 | ASTM E1277 | Standard Test Method for Analysis of Zinc-5% Aluminum-Mischmetal Alloys by ICP Emission Spectrometry |
| British Standards (BS) | ||
| 1 | BS 1702 | Mild steel drums (Heavy Duty - Fixed Ends) |
| 2 | BS 183 | General purpose galvanized steel wire strand |
| 3 | BS 215 | Aluminium conductors and aluminium conductors, steel-reinforced - For overhead power transmission |
| 4 | BS 2627 | Wrought aluminum for electrical purposes Wire |
| 5 | BS 3242 | Aluminium alloy stranded conductors for overhead power transmission |
| 6 | BS 443 | Testing zinc coatings on steel wire and for quality requirements |
| 7 | BS 4553 | 600/1 000 V single-phase split concentric electric cables |
| 8 | BS 4565 | Galvanized steel wire for aluminium conductors, steel-reinforced |
| 9 | BS 5308 | Instrumentation cables |
| 10 | BS 5467 | Thermosetting insulated, armoured cables of rated voltages of 600/1 000 V and 1900/3 300 V for fixed installations |
| 11 | BS 5714 | Method of measurement of resistivity of metallic materials |
| 12 | BS 6004 | Electric cables. PVC insulated and PVC sheathed cables for voltages up to and including 300/500 V, for electric power and lighting |
| 13 | BS 6231 | Electric cables Single core PVC insulated flexible cables of rated voltage of 600/1000V for switchgear and control gear wiring |
| 14 | BS 6346 | Electric cables - PVC insulated, armoured cables for voltages of 600/1 000 V and 1 900/3 300 V |
| 15 | BS 6360 | Conductors in insulated cables and cords |
| 16 | BS 6387 | Test method for resistance to fire of cables reTuired to maintain circuit integrity under fire conditions |
| 17 | BS 6485 | PVC-covered conductors for overhead power lines |
| 18 | BS 6622 | Electric cables - Armoured cables with thermosetting insulation for rated voltages from 38/66kV to 19/33kV - Requirements and test methods |
| 19 | BS 6724 | Thermosetting insulated, armoured cables of rated voltages of 600/1 000 V and 1900/3 300 V for fixed installations having low emission of smoke and corrosive gases when affected by fire |
| 20 | BS 6746 | Colour chart for insulation and sheath of electric cables |
| 21 | BS 7211 | Electric cables. Thermosetting insulated and thermoplastic sheathed cables for voltages up to and including 450/750 V for electric power and lighting and having low emission of smoke and corrosive gases when affected by fire |
| 22 | BS 7454 | Method for calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects |
| 23 | BS 7655 | Specification for insulating and sheathing materials for cables |
| 24 | BS 7671 | Requirements for Electrical Installations |
| 25 | BS 7769 | Electric cables - Calculation of the current rating |
| 26 | BS 7835 | Armoured cables with thermosetting insulation for rated voltages from 38/66 kV to 19/33 kV having low emission of smoke and corrosive gases when affected by fire Requirements and test methods |
| 27 | BS 7846 | Thermosetting insulated armoured fire resistant cables of rated voltage 600/1 000 V for fixed installations having low emission of smoke and corrosive gases when affected by fire |
| 28 | BS 7870 | LV and MV polymeric insulated cables for use by distribution and generation utilities |
| 29 | BS 7884 | Copper and copper-cadmium stranded conductors for overhead electric traction and power transmission systems |
| 30 | BS 7889 | Thermosetting insulated non armoured cables with a voltage of 600/1 000 V for fixed installations |
| 31 | BS 7912 | Power cables with XLPE insulation and metal sheath, and their accessories, for rated coltages from 66 kV (Um = 72.5 kV) to 132 kV (Um = 145 kV) |
| 32 | BS 7919 | Electric cables - Flexible cables rated up to 450/750 V, for use with appliances and equipment intended for industrial and similar environments |
| 33 | BS 8573 | Thermosetting insulated non armoured cables with a voltage of 600/1 000 V for fixed installations having low emissions of smoke and corrosive gases when affected by fire |
| 34 | BS EN 10244 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire |
| 35 | BS EN 10257 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables |
| 36 | BS EN 13602 | Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors |
| 37 | BS EN 1977 | Copper and copper alloys - Copper drawing stock (wire rod) |
| 38 | BS EN 50182 | Conductors for overhead lines - Round wire concentric lay stranded conductors |
| 39 | BS EN 50183 | Conductors for overhead lines - Aluminum - magnesium - silicon alloy wires |
| 40 | BS EN 50189 | Conductors for overhead lines - Zinc coated steel wires |
| 41 | BS EN 50266 | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables |
| 42 | BS EN 50267 | Common Test Methods for Cables Under Fire Conditions - Tests on Gases Evolved During Combustion of Materials From Cables |
| 43 | BS EN 50288 | Multi-element metallic cables used in analogue and digital communication and control |
| 44 | BS EN 50326 | Conductors for overhead lines - Characteristics of greases |
| 45 | BS EN 50363 | Insulating, sheathing and covering materials for low voltage energy cables |
| 46 | BS EN 50397 | covered conductors for overhead lines and the related accessories for rated voltages above 1 kV ac and not exceeding 36 kV ac |
| 47 | BS EN 50525 | Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) |
| 48 | BS EN 60811 | Insulating and sheathing materials of electric and optical cables - Common test methods |
| 49 | BS EN 60865 | Short-circuit currents - Calculation of effects |
| 50 | BS EN 60889 | Hard drawn aluminium wire for overhead line conductors |
| 51 | BS EN 62219 | Overhead electrical conductors - Formed wire, concentric lay, stranded conductors |
| 52 | BS EN ISO 1461 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods |
| 53 | BS EN ISO 175 | Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals |
| 54 | BS EN ISO 9001 | Quality management systems - Requirements |
| 55 | BS PAS 5308 | Control and instrumentation cables |
| Norma Italiana (CEI) | ||
| 1 | CEI-UNEL 35026 | Elastomeric and thermoplastic insulated power cables for rated vaoltages not exceeding 1000 V a.c. / 1500 V d.c. - Continuous current capacities for buried cables |
| 2 | CEI-UNEL 35024/1 | Elastomeric and thermoplastic insulated power cables for rated vaoltages not exceeding 1000 V a.c. / 1500 V d.c. - Continuous current capacities for cables laid in air |
| Norma Venezolana (COVENIN) | ||
| 1 | COVENIN 0541 | Alambres y cables aislados para distribución de energía eléctrica hasta 2000 V y cable de control |
| Canadian Standard (CSA) | ||
| 1 | C22.2 No. 210-05 | Appliance wiring material products |
| 2 | C22.2 No. 51-14 | Armoured cables |
| Deutsche Normen (DIN/VDE) | ||
| 1 | DIN VDE 0207 | Insulating and sheating compounds for cables and flexible cords |
| 2 | DIN VDE 0276-603 | Distribution cables of nominal voltages U0/U 0,6/1 kV |
| 3 | DIN VDE 0276-620 | Power cables – Part 620: Distribution cables of nominal voltages U0/U 3,6/6 V to 20,8/36 kV |
| 4 | DIN VDE 0276-626 | Power cables – Part 626/A1: Overhead distribution cables of rated voltage U0/U (Um): 0,6/1 (1,2) Kv |
| 5 | DIN VDE 0281 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V |
| 6 | DIN 46 391 | Delivery drums for cables and ropes |
| 7 | DIN 46 395 | Machine spools |
| 8 | DIN 46 397 | Spools for fabrication of wires |
| 9 | DIN 48 200 | Copper wires for stranded conductors |
| 10 | DIN 48 201-1 | Copper stranded conductors |
| 11 | DIN 48 201-2 | Bronze stranded conductors |
| 12 | DIN 48 201-3 | Steel stranded conductors |
| 13 | DIN 48 201-5 | Aluminium stranded conductors |
| 14 | DIN 48 201-6 | E-AlMgSi stranded conductors |
| 15 | DIN 48 201-7 | Copper clad steel stranded conductors |
| 16 | DIN 48 201-8 | Aluminium clad steel stranded conductors |
| 17 | DIN 48 204 | Steel reinforced aluminium stranded conductors |
| 18 | DIN 57250/VDE 0250 | Specifications for cables, wires and flexible cords for power installation |
| 19 | DIN 57472/VDE 0472 | Testing of cables, wires and flexible cords |
| Philippine National Standard (DPNS) | ||
| 1 | DPNS 35 | Electric wires and cables - Thermoplastic-insulated copper wires and cables rated 600 volts |
| 2 | DPNS 1207 | Electric wires and cables – soft drawn (annealed) copper stranded conductors for electrical purposes |
| European Standard (EN) | ||
| 1 | EN 50395 | Electrical test methods for low voltage energy cables |
| 2 | EN 50525 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) |
| 3 | EN 50618 | Electric cables for photovoltaic systems |
| 4 | EN 50620 | Electric cables - charging cables for electric vehicles |
| 5 | EN 60332 | Tests on electric and optical fibre cables under fire conditions |
| Technical Standards of KEPCO (ES) | ||
| 1 | ES-6145-0006 | ACSR/AW-OC for 22.9kV-Y |
| 2 | ES-6145-0020 | Concentric-Lay-Stranded Aluminum Conductors Aluminum-Clad Steel Reinforced |
| 3 | ES-6145-0021 | ACSR/AW-TR/OC |
| Soviet Union Standard (GOST) | ||
| 1 | GOST 839-80 | Uninsulated wires for aerial power lines |
| 2 | GOST 1508-78 | Control rubber- and plastic-insulated cables |
| 3 | GOST 6323-79 | Wires with PVC-insulation for electrical equipment |
| 4 | GOST 22483-77 | Сonductors for cables, wires and cords |
| Harmonization Document (HD) | ||
| 1 | HD 21 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V |
| 2 | HD 22 | Cables of rated voltages up to and including 450/750 V and having cross-linked insulation |
| 3 | HD 308 | Identification of cores in cables and flexible cords |
| 4 | HD 603 | Distribution cables of rated voltage 0.6/1 kV |
| 5 | HD 604 | 0.6/1 kV and 19/33 kV power cables with special fire performance for use in power stations |
| 6 | HD 605 | Electric cables -Additional test methods |
| 7 | HD 620 | Distribution cables with extruded insulation for rated voltages from 3.6/6 (72) kV up to and including 208/36 (42) kV |
| 8 | HD 622 | Power cables having rated voltages from 3.6/6 (72) kV up to and including 0.6/1 kV with special fire performance for use in power stations |
| 9 | HD 626 | Overhead distribution cables of rated voltage U0/U (Um): 0.6/1 (12) kV |
| 10 | HD 627 | Multi-core and multi-pair cable for insulation above and below ground |
| 11 | HD 632 | Power cables with extruded insulation and their accessories for rated voltages above 36 kV (Um = 42 kV) up to 150 kV (Um = 170 kV) |
| American National Standard (NEMA/ANSI/ICEA) | ||
| 1 | NEMA WC 5/ICEA S-61-402 | Thermoplastic-Insulated Wire and Cable for the Transmission and Distribution of Electrical Energy |
| 2 | NEMA WC 7/ICEA S-66-524 | Cross Linked Thermosetting Polyethylene Insulated Wire and Cable for the Transmission and Distribution of Electrical Energy |
| 3 | ANSI/ICEA S-70-547 | Weather-Resistant Polyethylene Covered Conductors |
| 4 | ANSI/ICEA S-73-532/NEMA WC 57 | Standard for Control, Thermocouple, Extension And Instrumentation Cable |
| 5 | ANSI/ICEA S-75-381/NEMA WC 58 | Portable and Power Feeder Cables for Use in Mines and Similar Applications |
| 6 | ANSI/ICEA S-76-474 | Standard for Neutral Supported Power Cable Assemblies with Weather Resistant Extruded Insulation Rated 600 Volts |
| 7 | ICEA S-93-639/NEMA WC 74 | 5-46 kV Shielded Power Cable for Use in the Transmission and Distribution of Electric Energy |
| 8 | ICEA S-94-649 | Concentric Neutral Cables Rated 5 through 46 KV |
| 9 | ANSI/NEMA WC 70/ICEA S-95-658 | Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy |
| 10 | ANSI/ICEA S-97-682 | Standard for Utility Shielded Power Cables Rated 5 through 46 kV |
| 11 | ANSI/ICEA S-105-692 | Standard for 600 Volt Single Layer Thermoset Insulated Utility Underground Distribution Cables |
| 12 | ANSI/ICEA S-108-720 | Extruded Insulation Power Cables Rated Above 46 through 500 kV AC |
| 13 | ANSI/ICEA S-121-733 | Tree Wire and Messenger Supported Spacer Cable |
| 14 | ANSI/ICEA T-27-581/NEMA WC 53 | Standard Test Methods for Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test |
| 15 | ANSI/ICEA T-28-562 | Test Method for Measurement of Hot Creep of Polymeric Insulations |
| 16 | ANSI/ICEA T-31-610 | Test Method for Conducting Longitudinal Water Penetration Resistance Tests on Blocked Conductors |
| International Standard (IEC) | ||
| 1 | IEC 60028 | International standard of resistance for copper |
| 2 | IEC 60060 | High-voltage test techniques |
| 3 | IEC 60092 | Electrical installations in ships |
| 4 | IEC 60104 | Aluminum-magnesium-silicon alloy wire for overhead line conductors |
| 5 | IEC 60121 | Recommendation for commercial annealed aluminum electrical conductor wire |
| 6 | IEC 60173 | Colours of the cores of flexible cables and cores |
| 7 | IEC 60183 | Guide to the selection of high voltage cables |
| 8 | IEC 60189 | Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods |
| 9 | IEC 60227 | Polyvinyl chloride insulated cables of rated voltage up to and including 450/750 V |
| 10 | IEC 60228 | Conductors of insulated cables |
| 11 | IEC 60229 | Electric cables - Tests on extruded oversheaths with a special protective function |
| 12 | IEC 60230 | Impulse tests on cables and their accessories |
| 13 | IEC 60245 | Rubber insulated cables - Rated voltages up to and including 450/750 V |
| 14 | IEC 60270 | High-Voltage test techniques - Partial discharge measurements |
| 15 | IEC 60287 | Electric cables - Calculation of the current rating |
| 16 | IEC 60304 | standard coulors for insulation for low-frequency cables and wires |
| 17 | IEC 60331 | Tests for electric cables under fire conditions Circuit integrity |
| 18 | IEC 60332 | Tests on electric and oStical fibre cables under fire conditions |
| 19 | IEC 60446 | Basic and safety principles for man-machine interface, marking and identification – Identification of conductors by colours or alphanumerics |
| 20 | IEC 60468 | Method of measurement of resistivity of metallic materials |
| 21 | IEC 60502 | Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV up to 30 kV (Um = 36 kV) |
| 22 | IEC 60719 | Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V |
| 23 | IEC 60724 | Short-circuit temperature limits of electric cables with rated voltages of 1kV (Um=12 kV) and 3 kV (Um=36 kV) |
| 24 | IEC 60754 | Test on gases evolved during combustion of materials from cables |
| 25 | IEC 60811 | Electric and optical fibre cables - Test methods for non metallic materials |
| 26 | IEC 60840 | Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) - Test methods and requirements |
| 27 | IEC 60853 | Calculation of the cyclic and emergency current rating of cables |
| 28 | IEC 60859 | |
| 29 | IEC 60865 | Short circuit currents - calculation of effects |
| 30 | IEC 60885 | Electrical test methods for electric cables |
| 31 | IEC 60888 | Zinc-Coated steel wires for stranded conductors |
| 32 | IEC 60889 | Hard drawn aluminum wire for overhead line conductors |
| 33 | IEC 60949 | Calculation of thermally permissible short-circuits currents, taking into account non-adiabatic heating effects |
| 34 | IEC 60986 | Short-circuit temperature limits of electric cables with rated voltages from 6kV (Um=72 kV) and to 30 kV (Um=36 kV) |
| 35 | IEC 61034 | 0easurement of smoNe densit\ of cables burning under defined conditions |
| 36 | IEC 61089 | Round wire concentric lay overhead electrical stranded conductors |
| 37 | IEC 61284 | Overhead lines - Requirements and tests for fittings |
| 38 | IEC 61232 | Aluminum - clad steel wires for electrical purposes |
| 39 | IEC 61394 | Overhead lines - Characteristics of greases for aluminum, aluminum alloy and steel bare conductors |
| 40 | IEC 61395 | Overhead electrical conductors – Creep test procedures for stranded conductors |
| 41 | IEC 61442 | Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) |
| 42 | IEC 61443 | Short circuit temperature limits of electric cables with rated voltages above 30 kV (Um=36 kV) |
| 43 | IEC 61597 | Overhead electrical conductors - calculation methods for stranded bare conductors |
| 44 | IEC 62004 | Thermal-resistant aluminium alloy wire for overhead line conductor |
| 45 | IEC TR 61901 | Tests recommended on cables with a longitudinally applied metal foil for rated voltages above 30 kV (Um = 36 kV) up to and including 500 kV (Um = 550 kV) |
| 46 | IEC 62067 | Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV) - Test methods and requirements |
| 47 | IEC 62095 | Electric Cables -Calculations for current ratings - Finite element method |
| 48 | IEC 62230 | Electric cables - Spark-test method |
| 49 | IEC 62930 | Electric cables for photovoltaic systems with a voltage rating of 1,5 kV DC |
| 50 | IEC 62440 | Electric cables with a rated voltage not exceeding 450/750 V - Guide to use |
| The Institute of Electrical and Electronics Engineers Standards (IEEE) | ||
| 1 | IEEE 738 | Standard for Calculating the Current-Temperature Relationship of Bare Overhead Conductors |
| 2 | IEEE 635 | Guide for Selection and Design of Aluminum Sheaths for Power Cables |
| 3 | IEEE 532 | Guide for Selecting and Testing Jackets for Power, Instrumentation, and Control Cables |
| 4 | IEEE 1242 | Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants |
| 5 | IEEE 1142 | Guide for the Selection, Testing, Application, and Installation of Cables having Radial-Moisture Barriers and/or Longitudinal Water Blocking |
| 6 | IEEE 1202 | Standard for Flame-Propagation Testing of Wire & Cable |
| 7 | IEEE 1580 | Recommended Practice for Marine Cable for Use on Shipboard and Fixed or Floating Facilities |
| 8 | IEEE 575 | Guide for Bonding Shields and Sheaths of Single-Conductor Power Cables Rated 5 kV through 500 kV |
| 9 | IEEE 576 | Recommended Practice for Installation, Termination, and Testing of Insulated Power Cable as Used in Industrial and Commercial Applications |
| Norma IRAM (IRAM) | ||
| 1 | IRAM 2187 | Aluminum and aluminum alloy with normal mechanical strength steel core conductors |
| 2 | IRAM 722 | Galvanized Steel Wire Ropes for General Purpose |
| NF Standards | ||
| 1 | NF C 32-321 | Insulated cables and conductors for installations - Rigid cross-linked polyethylene insulated cables covered with a polyvinylchloride sheath - Series U-1000 R2V and U-1000 AR2V |
| 2 | NF C 33-209 | Insulated or protected cables for power systems - Bundle assembled cores for overhead systems of rated voltage 0,6/1 kV |
| 3 | NF C 33-226 | Insulated cables and their accessories for power systems - Cross-linked polyethylene cables of rated voltages from 0.6/1 kV up to 0.6/1 kV with fixed gradient for distribution networks |
| 4 | NF C 33-254 | Insulated cables and their accessories for power systems - Particular requirements for the use on french power systems of cables with extruded insulation and of their accessories of rated voltage above 30 kV (Um = 36 kV) |
| 5 | NF C 34-125 | Aluminium alloy and aluminium steel reinforced, bare conductors for overhead lines |
| NORMA TÉCNICA PERUANA (NTP) | ||
| 1 | NTP 370.254 | Cables para distribución aérea autosoportados aislados con XLPE para tensiones hasta e inclusive 0,6/1 kV |
| 2 | NTP 370.258 | Conductores con alambres redondos de aluminio cableados concéntricamente para líneas aéreas |
| Power Institute For East & Southern Africa Standard (PIESA) | ||
| 1 | PIESA 003 | Low-voltage (600/1000 V) cable systems for underground electrical distribution |
| 2 | PIESA 1004 | Low-voltage (600/1000 V) cable systems for overhead electrical distribution |
| 3 | PIESA 1012 | Cable terminations and live conductors within air-insulated enclosures (insulation co-ordination) for rated A.C. voltages of 7.2 kV and up to and including 36 kV |
| 4 | PIESA 1062 | Concentric single-phase aerial service cable - For domestic service connections with a combined neutral-earth conductor |
| South African National Standard (SANS/SABS) | ||
| 1 | SANS 1339 | Electric cables — Cross-linked polyethylene (XLPE) insulated cables for rated voltages 3,8/6,6 kV to 19/33 kV |
| 2 | SANS 1411 | Materials of insulated electric cables and flexible cords |
| 3 | SANS 1507 | Electric cables with extruded solid dielectric insulation for fixed installations (300/500 V to 1 900/3 300 V) |
| 4 | SANS 1574 | Electric flexible cores, cords and cables with solid extruded dielectric insulation |
| 5 | SANS 1713 | Electric Cables medium voltage aerial bundled conductors for voltages from 3,8/6,6 kV to 19/33 kV |
| 6 | SANS 182 | Conductors for overhead electrical transmission lines |
| 7 | SANS 6284 | Test methods for cross-linked polyethylene (XLPE) insulated electric cables |
| 8 | SANS 935 | Hot-dip (galvanized) zinc coatings on steel wire |
| 9 | SANS 5524 | Alternating current spark t e s t on e l e c t r i c cables and cords |
| 10 | SANS 5526 | Dielectric Resistance of Electric Cables |
| 11 | SANS 5956 | Acid gas evolved during combustion of cable materials |
| 12 | SANS 6282 | Test methods for bare conductors and conductors of insulated electric cables |
| Thailand Industrial Standard (TIS) | ||
| 1 | TIS 85-2522 | Aluminium conductor cables |
| 2 | TIS 85-2548 | Round wire concentric lay overhead electrical stranded conductors |
| 3 | TIS 293-2541 | PVC Insulated Aluminium Cables |
| 4 | TIS 2341-2555 | Aluminium space aerial power cables with XLPE insulated and sheathed for rated voltage of 25 kV and 35 kV |
| PfG Standard (PfG) | ||
| 1 | 2 PfG 1169/08.2007 | Requirements for cables for use in photovoltaic-systems |
| 2 | 2 PfG 1908/05.12 | Requirements for cables for electric vehicle conductive charging system |
| Uderwriters Laboratories Standard (UL) | ||
| 1 | UL 44 | Thermoset-Insulated Wires and Cables |
| 2 | UL 66 | Fixture Wire |
| 3 | UL 758 | Appliance Wiring Material |
| 4 | UL 83 | Thermoplastic-Insulated Wires and Cables |
| 5 | UL 854 | Service-Entrance Cables |
| 6 | UL 94 | Tests for Flammability of Plastic Materials for Parts in Devices and Appliances testing |
| 7 | UL 1072 | Medium-Voltage Power Cables |
| 8 | UL 1481 | Power Supplies for Fire-Protective Signaling Systems |
| 9 | UL 1569 | Metal-Clad Cables |
| 10 | UL 1581 | Reference Standard for Electrical Wires, Cables, and Flexible Cords |
| 11 | UL 2196 | Tests for Fire Resistive Cables |
| Association of Edison Illuminating Companies Specification (AEIC) | ||
| 1 | AEIC CS8 | Specification for Extruded Dielectric, Shielded Power Cables Rated 5 Through 46 kV |
| Australian and New Zealand Standard (AS) & Australian and New Zealand Standard (AS/ANS) | ||
| 1 | AS 1222 | Steel conductors and stays - Bare overhead |
| 2 | AS 1391 | Metallic materials - Tensile testing at ambient temperature |
| 3 | AS 1531 | Conductors - Bare Overhead - Aluminium and Aluminium Alloy |
| 4 | AS 1746 | Conductors - Bare overhead - Hard-drawn copper |
| 5 | AS 2848 | Aluminium and aluminium alloys - Compositions and designations |
| 6 | AS 3607 | Conductors -Bare overhead, aluminium and aluminium alloy - Steel reinforced |
| 7 | AS/NZS 1125 | Conductors in insulated electric cables and flexible cords |
| 8 | AS/NZS 1429 | Electric cables - Polymeric insulated |
| 9 | AS/NZS 1660 | Test methods for electric cables, cords and conductors |
| 10 | AS/NZS 1802 | Electric cables - Reeling and trailing - For underground coal mining |
| 11 | AS/NZS 1972 | Electric cables - Underground coal mines - Other than reeling and trailing |
| 12 | AS/NZS 2802 | Electric cables - Reeling and trailing - For mining and general use (other than underground coal mining) |
| 13 | AS/NZS 2857 | Timber drums for insulated electric cables and bare conductors |
| 14 | AS/NZS 3013 | Electrical installations - Classification of the fire and mechanical performance of wiring system elements |
| 15 | AS/NZS 3191 | Electric flexible cords |
| 16 | AS/NZS 3560 | Electric cables - Cross-linked polyethylene insulated - Aerial bundled - For working voltages up to and including 0.6/1 (1.2) kV |
| 17 | AS/NZS 3599 | Electric cables - Aerial bundled - Polymeric insulated - Voltages 6.35/11 (12) kV and 12.7/22 (24) kV Metallic screened |
| 18 | AS/NZS 3675 | Conductors - Covered overhead - For working voltages 6.35/11 (12) kV up to and including 19/33 (36) kV |
| 19 | AS/NZS 3808 | Insulating and sheathing materials for electric cables |
| 20 | AS/NZS 3863 | Galvanized mild steel wire for armouring of cables |
| 21 | AS/NZS 4026 | Electric cables - For underground residential distribution systems |
| 22 | AS/NZS 4961 | Electric cables - Polymeric insulated - For distribution and service applications |
| 23 | AS/NZS 5000 | Electric cables - Polymeric insulated |
| 24 | AS/NZS 5033 | Installation of photovoltaic (PV) arrays |
| ASTM Standard (ASTM) | ||
| 1 | ASTM A90 | Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings |
| 2 | ASTM A363 | Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand |
| 3 | ASTM A370 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| 4 | ASTM A475 | Standard Specification for Zinc-Coated Steel Wire Strand |
| 5 | ASTM B1 | Standard Specification for Hard-Drawn Copper Wire |
| 6 | ASTM B2 | Standard Specification for Medium-Hard-Drawn Copper Wire |
| 7 | ASTM B3 | Standard Specification for Soft or Annealed Copper Wire |
| 8 | ASTM B8 | Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft |
| 9 | ASTM B33 | Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes |
| 10 | ASTM B173 | Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors |
| 11 | ASTM B174 | Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors |
| 12 | ASTM B193 | Standard Test Method for Resistivity of Electrical Conductor Materials |
| 13 | ASTM B227 | Standard Specification for Hard-Drawn Copper-Clad Steel Wire |
| 14 | ASTM B230 | Standard Specification for Aluminum 1350–H19 Wire for Electrical Purposes |
| 15 | ASTM B231 | Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors |
| 16 | ASTM B232 | Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR) |
| 17 | ASTM B233 | Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes |
| 18 | ASTM B258 | Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors |
| 19 | ASTM B33 | Standard Specification for Tin-Coated Soft or Annealed Copper Wire for Electrical Purposes |
| 20 | ASTM B396 | Standard Specification for Aluminum-Alloy 5005-H19 Wire for Electrical Purposes |
| 21 | ASTM B398 | Standard Specification for Aluminum-Alloy 6201-T81 and 6201-T83 Wire for Electrical Purposes |
| 22 | ASTM B399 | Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors |
| 23 | ASTM B400 | Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors |
| 24 | ASTM B415 | Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire |
| 25 | ASTM B416 | Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors |
| 26 | ASTM B496 | Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors |
| 27 | ASTM B498 | Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors |
| 28 | ASTM B500 | Standard Specification for Metallic Coated or Aluminum Clad Stranded Steel Core for Use in Overhead Electrical Conductors |
| 29 | ASTM B502 | Standard Specification for Aluminum-Clad Steel Core Wire for Use in Overhead Electrical Aluminum Conductors |
| 30 | ASTM B524 | Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201) |
| 31 | ASTM B531 | Standard Specification for Aluminum-Alloy 5005 Drawing Stock for Electrical Purposes |
| 32 | ASTM B549 | Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced for Use in Overhead Electrical Conductors |
| 33 | ASTM B577 | Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper |
| 34 | ASTM B606 | Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced |
| 35 | ASTM B609 | Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes |
| 36 | ASTM B711 | Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201) |
| 37 | ASTM B779 | Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW) |
| 38 | ASTM B800 | Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes—Annealed and Intermediate Tempers |
| 39 | ASTM B801 | Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation |
| 40 | ASTM B802 | Standard Specification for Zinc–5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) |
| 41 | ASTM B856 | Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS) |
| 42 | ASTM B857 | Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW) |
| 43 | ASTM B911 | Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP) |
| 44 | ASTM B941 | Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes |
| 45 | ASTM D412 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers - Tension |
| 46 | ASTM D471 | Standard Test Method for Rubber Property—Effect of Liquids |
| 47 | ASTM D566 | Standard Test Method for Dropping Point of Lubricating Grease |
| 48 | ASTM D2765 | Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics |
| 49 | ASTM D2303 | Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials |
| 50 | ASTM E1277 | Standard Test Method for Analysis of Zinc-5% Aluminum-Mischmetal Alloys by ICP Emission Spectrometry |
| British Standards (BS) | ||
| 1 | BS 1702 | Mild steel drums (Heavy Duty - Fixed Ends) |
| 2 | BS 183 | General purpose galvanized steel wire strand |
| 3 | BS 215 | Aluminium conductors and aluminium conductors, steel-reinforced - For overhead power transmission |
| 4 | BS 2627 | Wrought aluminum for electrical purposes Wire |
| 5 | BS 3242 | Aluminium alloy stranded conductors for overhead power transmission |
| 6 | BS 443 | Testing zinc coatings on steel wire and for quality requirements |
| 7 | BS 4553 | 600/1 000 V single-phase split concentric electric cables |
| 8 | BS 4565 | Galvanized steel wire for aluminium conductors, steel-reinforced |
| 9 | BS 5308 | Instrumentation cables |
| 10 | BS 5467 | Thermosetting insulated, armoured cables of rated voltages of 600/1 000 V and 1900/3 300 V for fixed installations |
| 11 | BS 5714 | Method of measurement of resistivity of metallic materials |
| 12 | BS 6004 | Electric cables. PVC insulated and PVC sheathed cables for voltages up to and including 300/500 V, for electric power and lighting |
| 13 | BS 6231 | Electric cables Single core PVC insulated flexible cables of rated voltage of 600/1000V for switchgear and control gear wiring |
| 14 | BS 6346 | Electric cables - PVC insulated, armoured cables for voltages of 600/1 000 V and 1 900/3 300 V |
| 15 | BS 6360 | Conductors in insulated cables and cords |
| 16 | BS 6387 | Test method for resistance to fire of cables reTuired to maintain circuit integrity under fire conditions |
| 17 | BS 6485 | PVC-covered conductors for overhead power lines |
| 18 | BS 6622 | Electric cables - Armoured cables with thermosetting insulation for rated voltages from 38/66kV to 19/33kV - Requirements and test methods |
| 19 | BS 6724 | Thermosetting insulated, armoured cables of rated voltages of 600/1 000 V and 1900/3 300 V for fixed installations having low emission of smoke and corrosive gases when affected by fire |
| 20 | BS 6746 | Colour chart for insulation and sheath of electric cables |
| 21 | BS 7211 | Electric cables. Thermosetting insulated and thermoplastic sheathed cables for voltages up to and including 450/750 V for electric power and lighting and having low emission of smoke and corrosive gases when affected by fire |
| 22 | BS 7454 | Method for calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects |
| 23 | BS 7655 | Specification for insulating and sheathing materials for cables |
| 24 | BS 7671 | Requirements for Electrical Installations |
| 25 | BS 7769 | Electric cables - Calculation of the current rating |
| 26 | BS 7835 | Armoured cables with thermosetting insulation for rated voltages from 38/66 kV to 19/33 kV having low emission of smoke and corrosive gases when affected by fire Requirements and test methods |
| 27 | BS 7846 | Thermosetting insulated armoured fire resistant cables of rated voltage 600/1 000 V for fixed installations having low emission of smoke and corrosive gases when affected by fire |
| 28 | BS 7870 | LV and MV polymeric insulated cables for use by distribution and generation utilities |
| 29 | BS 7884 | Copper and copper-cadmium stranded conductors for overhead electric traction and power transmission systems |
| 30 | BS 7889 | Thermosetting insulated non armoured cables with a voltage of 600/1 000 V for fixed installations |
| 31 | BS 7912 | Power cables with XLPE insulation and metal sheath, and their accessories, for rated coltages from 66 kV (Um = 72.5 kV) to 132 kV (Um = 145 kV) |
| 32 | BS 7919 | Electric cables - Flexible cables rated up to 450/750 V, for use with appliances and equipment intended for industrial and similar environments |
| 33 | BS 8573 | Thermosetting insulated non armoured cables with a voltage of 600/1 000 V for fixed installations having low emissions of smoke and corrosive gases when affected by fire |
| 34 | BS EN 10244 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire |
| 35 | BS EN 10257 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables |
| 36 | BS EN 13602 | Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors |
| 37 | BS EN 1977 | Copper and copper alloys - Copper drawing stock (wire rod) |
| 38 | BS EN 50182 | Conductors for overhead lines - Round wire concentric lay stranded conductors |
| 39 | BS EN 50183 | Conductors for overhead lines - Aluminum - magnesium - silicon alloy wires |
| 40 | BS EN 50189 | Conductors for overhead lines - Zinc coated steel wires |
| 41 | BS EN 50266 | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables |
| 42 | BS EN 50267 | Common Test Methods for Cables Under Fire Conditions - Tests on Gases Evolved During Combustion of Materials From Cables |
| 43 | BS EN 50288 | Multi-element metallic cables used in analogue and digital communication and control |
| 44 | BS EN 50326 | Conductors for overhead lines - Characteristics of greases |
| 45 | BS EN 50363 | Insulating, sheathing and covering materials for low voltage energy cables |
| 46 | BS EN 50397 | covered conductors for overhead lines and the related accessories for rated voltages above 1 kV ac and not exceeding 36 kV ac |
| 47 | BS EN 50525 | Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) |
| 48 | BS EN 60811 | Insulating and sheathing materials of electric and optical cables - Common test methods |
| 49 | BS EN 60865 | Short-circuit currents - Calculation of effects |
| 50 | BS EN 60889 | Hard drawn aluminium wire for overhead line conductors |
| 51 | BS EN 62219 | Overhead electrical conductors - Formed wire, concentric lay, stranded conductors |
| 52 | BS EN ISO 1461 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods |
| 53 | BS EN ISO 175 | Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals |
| 54 | BS EN ISO 9001 | Quality management systems - Requirements |
| 55 | BS PAS 5308 | Control and instrumentation cables |
| Norma Italiana (CEI) | ||
| 1 | CEI-UNEL 35026 | Elastomeric and thermoplastic insulated power cables for rated vaoltages not exceeding 1000 V a.c. / 1500 V d.c. - Continuous current capacities for buried cables |
| 2 | CEI-UNEL 35024/1 | Elastomeric and thermoplastic insulated power cables for rated vaoltages not exceeding 1000 V a.c. / 1500 V d.c. - Continuous current capacities for cables laid in air |
| Norma Venezolana (COVENIN) | ||
| 1 | COVENIN 0541 | Alambres y cables aislados para distribución de energía eléctrica hasta 2000 V y cable de control |
| Canadian Standard (CSA) | ||
| 1 | C22.2 No. 210-05 | Appliance wiring material products |
| 2 | C22.2 No. 51-14 | Armoured cables |
| Deutsche Normen (DIN/VDE) | ||
| 1 | DIN VDE 0207 | Insulating and sheating compounds for cables and flexible cords |
| 2 | DIN VDE 0276-603 | Distribution cables of nominal voltages U0/U 0,6/1 kV |
| 3 | DIN VDE 0276-620 | Power cables – Part 620: Distribution cables of nominal voltages U0/U 3,6/6 V to 20,8/36 kV |
| 4 | DIN VDE 0276-626 | Power cables – Part 626/A1: Overhead distribution cables of rated voltage U0/U (Um): 0,6/1 (1,2) Kv |
| 5 | DIN VDE 0281 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V |
| 6 | DIN 46 391 | Delivery drums for cables and ropes |
| 7 | DIN 46 395 | Machine spools |
| 8 | DIN 46 397 | Spools for fabrication of wires |
| 9 | DIN 48 200 | Copper wires for stranded conductors |
| 10 | DIN 48 201-1 | Copper stranded conductors |
| 11 | DIN 48 201-2 | Bronze stranded conductors |
| 12 | DIN 48 201-3 | Steel stranded conductors |
| 13 | DIN 48 201-5 | Aluminium stranded conductors |
| 14 | DIN 48 201-6 | E-AlMgSi stranded conductors |
| 15 | DIN 48 201-7 | Copper clad steel stranded conductors |
| 16 | DIN 48 201-8 | Aluminium clad steel stranded conductors |
| 17 | DIN 48 204 | Steel reinforced aluminium stranded conductors |
| 18 | DIN 57250/VDE 0250 | Specifications for cables, wires and flexible cords for power installation |
| 19 | DIN 57472/VDE 0472 | Testing of cables, wires and flexible cords |
| Philippine National Standard (DPNS) | ||
| 1 | DPNS 35 | Electric wires and cables - Thermoplastic-insulated copper wires and cables rated 600 volts |
| 2 | DPNS 1207 | Electric wires and cables – soft drawn (annealed) copper stranded conductors for electrical purposes |
| European Standard (EN) | ||
| 1 | EN 50395 | Electrical test methods for low voltage energy cables |
| 2 | EN 50525 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) |
| 3 | EN 50618 | Electric cables for photovoltaic systems |
| 4 | EN 50620 | Electric cables - charging cables for electric vehicles |
| 5 | EN 60332 | Tests on electric and optical fibre cables under fire conditions |
| Technical Standards of KEPCO (ES) | ||
| 1 | ES-6145-0006 | ACSR/AW-OC for 22.9kV-Y |
| 2 | ES-6145-0020 | Concentric-Lay-Stranded Aluminum Conductors Aluminum-Clad Steel Reinforced |
| 3 | ES-6145-0021 | ACSR/AW-TR/OC |
| Soviet Union Standard (GOST) | ||
| 1 | GOST 839-80 | Uninsulated wires for aerial power lines |
| 2 | GOST 1508-78 | Control rubber- and plastic-insulated cables |
| 3 | GOST 6323-79 | Wires with PVC-insulation for electrical equipment |
| 4 | GOST 22483-77 | Сonductors for cables, wires and cords |
| Harmonization Document (HD) | ||
| 1 | HD 21 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V |
| 2 | HD 22 | Cables of rated voltages up to and including 450/750 V and having cross-linked insulation |
| 3 | HD 308 | Identification of cores in cables and flexible cords |
| 4 | HD 603 | Distribution cables of rated voltage 0.6/1 kV |
| 5 | HD 604 | 0.6/1 kV and 19/33 kV power cables with special fire performance for use in power stations |
| 6 | HD 605 | Electric cables -Additional test methods |
| 7 | HD 620 | Distribution cables with extruded insulation for rated voltages from 3.6/6 (72) kV up to and including 208/36 (42) kV |
| 8 | HD 622 | Power cables having rated voltages from 3.6/6 (72) kV up to and including 0.6/1 kV with special fire performance for use in power stations |
| 9 | HD 626 | Overhead distribution cables of rated voltage U0/U (Um): 0.6/1 (12) kV |
| 10 | HD 627 | Multi-core and multi-pair cable for insulation above and below ground |
| 11 | HD 632 | Power cables with extruded insulation and their accessories for rated voltages above 36 kV (Um = 42 kV) up to 150 kV (Um = 170 kV) |
| American National Standard (NEMA/ANSI/ICEA) | ||
| 1 | NEMA WC 5/ICEA S-61-402 | Thermoplastic-Insulated Wire and Cable for the Transmission and Distribution of Electrical Energy |
| 2 | NEMA WC 7/ICEA S-66-524 | Cross Linked Thermosetting Polyethylene Insulated Wire and Cable for the Transmission and Distribution of Electrical Energy |
| 3 | ANSI/ICEA S-70-547 | Weather-Resistant Polyethylene Covered Conductors |
| 4 | ANSI/ICEA S-73-532/NEMA WC 57 | Standard for Control, Thermocouple, Extension And Instrumentation Cable |
| 5 | ANSI/ICEA S-75-381/NEMA WC 58 | Portable and Power Feeder Cables for Use in Mines and Similar Applications |
| 6 | ANSI/ICEA S-76-474 | Standard for Neutral Supported Power Cable Assemblies with Weather Resistant Extruded Insulation Rated 600 Volts |
| 7 | ICEA S-93-639/NEMA WC 74 | 5-46 kV Shielded Power Cable for Use in the Transmission and Distribution of Electric Energy |
| 8 | ICEA S-94-649 | Concentric Neutral Cables Rated 5 through 46 KV |
| 9 | ANSI/NEMA WC 70/ICEA S-95-658 | Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy |
| 10 | ANSI/ICEA S-97-682 | Standard for Utility Shielded Power Cables Rated 5 through 46 kV |
| 11 | ANSI/ICEA S-105-692 | Standard for 600 Volt Single Layer Thermoset Insulated Utility Underground Distribution Cables |
| 12 | ANSI/ICEA S-108-720 | Extruded Insulation Power Cables Rated Above 46 through 500 kV AC |
| 13 | ANSI/ICEA S-121-733 | Tree Wire and Messenger Supported Spacer Cable |
| 14 | ANSI/ICEA T-27-581/NEMA WC 53 | Standard Test Methods for Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test |
| 15 | ANSI/ICEA T-28-562 | Test Method for Measurement of Hot Creep of Polymeric Insulations |
| 16 | ANSI/ICEA T-31-610 | Test Method for Conducting Longitudinal Water Penetration Resistance Tests on Blocked Conductors |
| International Standard (IEC) | ||
| 1 | IEC 60028 | International standard of resistance for copper |
| 2 | IEC 60060 | High-voltage test techniques |
| 3 | IEC 60092 | Electrical installations in ships |
| 4 | IEC 60104 | Aluminum-magnesium-silicon alloy wire for overhead line conductors |
| 5 | IEC 60121 | Recommendation for commercial annealed aluminum electrical conductor wire |
| 6 | IEC 60173 | Colours of the cores of flexible cables and cores |
| 7 | IEC 60183 | Guide to the selection of high voltage cables |
| 8 | IEC 60189 | Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods |
| 9 | IEC 60227 | Polyvinyl chloride insulated cables of rated voltage up to and including 450/750 V |
| 10 | IEC 60228 | Conductors of insulated cables |
| 11 | IEC 60229 | Electric cables - Tests on extruded oversheaths with a special protective function |
| 12 | IEC 60230 | Impulse tests on cables and their accessories |
| 13 | IEC 60245 | Rubber insulated cables - Rated voltages up to and including 450/750 V |
| 14 | IEC 60270 | High-Voltage test techniques - Partial discharge measurements |
| 15 | IEC 60287 | Electric cables - Calculation of the current rating |
| 16 | IEC 60304 | standard coulors for insulation for low-frequency cables and wires |
| 17 | IEC 60331 | Tests for electric cables under fire conditions Circuit integrity |
| 18 | IEC 60332 | Tests on electric and oStical fibre cables under fire conditions |
| 19 | IEC 60446 | Basic and safety principles for man-machine interface, marking and identification – Identification of conductors by colours or alphanumerics |
| 20 | IEC 60468 | Method of measurement of resistivity of metallic materials |
| 21 | IEC 60502 | Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV up to 30 kV (Um = 36 kV) |
| 22 | IEC 60719 | Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V |
| 23 | IEC 60724 | Short-circuit temperature limits of electric cables with rated voltages of 1kV (Um=12 kV) and 3 kV (Um=36 kV) |
| 24 | IEC 60754 | Test on gases evolved during combustion of materials from cables |
| 25 | IEC 60811 | Electric and optical fibre cables - Test methods for non metallic materials |
| 26 | IEC 60840 | Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) - Test methods and requirements |
| 27 | IEC 60853 | Calculation of the cyclic and emergency current rating of cables |
| 28 | IEC 60859 | |
| 29 | IEC 60865 | Short circuit currents - calculation of effects |
| 30 | IEC 60885 | Electrical test methods for electric cables |
| 31 | IEC 60888 | Zinc-Coated steel wires for stranded conductors |
| 32 | IEC 60889 | Hard drawn aluminum wire for overhead line conductors |
| 33 | IEC 60949 | Calculation of thermally permissible short-circuits currents, taking into account non-adiabatic heating effects |
| 34 | IEC 60986 | Short-circuit temperature limits of electric cables with rated voltages from 6kV (Um=72 kV) and to 30 kV (Um=36 kV) |
| 35 | IEC 61034 | 0easurement of smoNe densit\ of cables burning under defined conditions |
| 36 | IEC 61089 | Round wire concentric lay overhead electrical stranded conductors |
| 37 | IEC 61284 | Overhead lines - Requirements and tests for fittings |
| 38 | IEC 61232 | Aluminum - clad steel wires for electrical purposes |
| 39 | IEC 61394 | Overhead lines - Characteristics of greases for aluminum, aluminum alloy and steel bare conductors |
| 40 | IEC 61395 | Overhead electrical conductors – Creep test procedures for stranded conductors |
| 41 | IEC 61442 | Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) |
| 42 | IEC 61443 | Short circuit temperature limits of electric cables with rated voltages above 30 kV (Um=36 kV) |
| 43 | IEC 61597 | Overhead electrical conductors - calculation methods for stranded bare conductors |
| 44 | IEC 62004 | Thermal-resistant aluminium alloy wire for overhead line conductor |
| 45 | IEC TR 61901 | Tests recommended on cables with a longitudinally applied metal foil for rated voltages above 30 kV (Um = 36 kV) up to and including 500 kV (Um = 550 kV) |
| 46 | IEC 62067 | Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV) - Test methods and requirements |
| 47 | IEC 62095 | Electric Cables -Calculations for current ratings - Finite element method |
| 48 | IEC 62230 | Electric cables - Spark-test method |
| 49 | IEC 62930 | Electric cables for photovoltaic systems with a voltage rating of 1,5 kV DC |
| 50 | IEC 62440 | Electric cables with a rated voltage not exceeding 450/750 V - Guide to use |
| The Institute of Electrical and Electronics Engineers Standards (IEEE) | ||
| 1 | IEEE 738 | Standard for Calculating the Current-Temperature Relationship of Bare Overhead Conductors |
| 2 | IEEE 635 | Guide for Selection and Design of Aluminum Sheaths for Power Cables |
| 3 | IEEE 532 | Guide for Selecting and Testing Jackets for Power, Instrumentation, and Control Cables |
| 4 | IEEE 1242 | Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants |
| 5 | IEEE 1142 | Guide for the Selection, Testing, Application, and Installation of Cables having Radial-Moisture Barriers and/or Longitudinal Water Blocking |
| 6 | IEEE 1202 | Standard for Flame-Propagation Testing of Wire & Cable |
| 7 | IEEE 1580 | Recommended Practice for Marine Cable for Use on Shipboard and Fixed or Floating Facilities |
| 8 | IEEE 575 | Guide for Bonding Shields and Sheaths of Single-Conductor Power Cables Rated 5 kV through 500 kV |
| 9 | IEEE 576 | Recommended Practice for Installation, Termination, and Testing of Insulated Power Cable as Used in Industrial and Commercial Applications |
| Norma IRAM (IRAM) | ||
| 1 | IRAM 2187 | Aluminum and aluminum alloy with normal mechanical strength steel core conductors |
| 2 | IRAM 722 | Galvanized Steel Wire Ropes for General Purpose |
| NF Standards | ||
| 1 | NF C 32-321 | Insulated cables and conductors for installations - Rigid cross-linked polyethylene insulated cables covered with a polyvinylchloride sheath - Series U-1000 R2V and U-1000 AR2V |
| 2 | NF C 33-209 | Insulated or protected cables for power systems - Bundle assembled cores for overhead systems of rated voltage 0,6/1 kV |
| 3 | NF C 33-226 | Insulated cables and their accessories for power systems - Cross-linked polyethylene cables of rated voltages from 0.6/1 kV up to 0.6/1 kV with fixed gradient for distribution networks |
| 4 | NF C 33-254 | Insulated cables and their accessories for power systems - Particular requirements for the use on french power systems of cables with extruded insulation and of their accessories of rated voltage above 30 kV (Um = 36 kV) |
| 5 | NF C 34-125 | Aluminium alloy and aluminium steel reinforced, bare conductors for overhead lines |
| NORMA TÉCNICA PERUANA (NTP) | ||
| 1 | NTP 370.254 | Cables para distribución aérea autosoportados aislados con XLPE para tensiones hasta e inclusive 0,6/1 kV |
| 2 | NTP 370.258 | Conductores con alambres redondos de aluminio cableados concéntricamente para líneas aéreas |
| Power Institute For East & Southern Africa Standard (PIESA) | ||
| 1 | PIESA 003 | Low-voltage (600/1000 V) cable systems for underground electrical distribution |
| 2 | PIESA 1004 | Low-voltage (600/1000 V) cable systems for overhead electrical distribution |
| 3 | PIESA 1012 | Cable terminations and live conductors within air-insulated enclosures (insulation co-ordination) for rated A.C. voltages of 7.2 kV and up to and including 36 kV |
| 4 | PIESA 1062 | Concentric single-phase aerial service cable - For domestic service connections with a combined neutral-earth conductor |
| South African National Standard (SANS/SABS) | ||
| 1 | SANS 1339 | Electric cables — Cross-linked polyethylene (XLPE) insulated cables for rated voltages 3,8/6,6 kV to 19/33 kV |
| 2 | SANS 1411 | Materials of insulated electric cables and flexible cords |
| 3 | SANS 1507 | Electric cables with extruded solid dielectric insulation for fixed installations (300/500 V to 1 900/3 300 V) |
| 4 | SANS 1574 | Electric flexible cores, cords and cables with solid extruded dielectric insulation |
| 5 | SANS 1713 | Electric Cables medium voltage aerial bundled conductors for voltages from 3,8/6,6 kV to 19/33 kV |
| 6 | SANS 182 | Conductors for overhead electrical transmission lines |
| 7 | SANS 6284 | Test methods for cross-linked polyethylene (XLPE) insulated electric cables |
| 8 | SANS 935 | Hot-dip (galvanized) zinc coatings on steel wire |
| 9 | SANS 5524 | Alternating current spark t e s t on e l e c t r i c cables and cords |
| 10 | SANS 5526 | Dielectric Resistance of Electric Cables |
| 11 | SANS 5956 | Acid gas evolved during combustion of cable materials |
| 12 | SANS 6282 | Test methods for bare conductors and conductors of insulated electric cables |
| Thailand Industrial Standard (TIS) | ||
| 1 | TIS 85-2522 | Aluminium conductor cables |
| 2 | TIS 85-2548 | Round wire concentric lay overhead electrical stranded conductors |
| 3 | TIS 293-2541 | PVC Insulated Aluminium Cables |
| 4 | TIS 2341-2555 | Aluminium space aerial power cables with XLPE insulated and sheathed for rated voltage of 25 kV and 35 kV |
| PfG Standard (PfG) | ||
| 1 | 2 PfG 1169/08.2007 | Requirements for cables for use in photovoltaic-systems |
| 2 | 2 PfG 1908/05.12 | Requirements for cables for electric vehicle conductive charging system |
| Uderwriters Laboratories Standard (UL) | ||
| 1 | UL 44 | Thermoset-Insulated Wires and Cables |
| 2 | UL 66 | Fixture Wire |
| 3 | UL 758 | Appliance Wiring Material |
| 4 | UL 83 | Thermoplastic-Insulated Wires and Cables |
| 5 | UL 854 | Service-Entrance Cables |
| 6 | UL 94 | Tests for Flammability of Plastic Materials for Parts in Devices and Appliances testing |
| 7 | UL 1072 | Medium-Voltage Power Cables |
| 8 | UL 1481 | Power Supplies for Fire-Protective Signaling Systems |
| 9 | UL 1569 | Metal-Clad Cables |
| 10 | UL 1581 | Reference Standard for Electrical Wires, Cables, and Flexible Cords |
| 11 | UL 2196 | Tests for Fire Resistive Cables |
