33kV 3Cx95 Sq.mm XLPE SWA CU MV Power Underground Cable
33kV SWA armoured Power Cable is designed and tested to meet or exceed the requirements of IEC 60502-2 standard and/or BS 6622 standard with rated voltage 19 / 33 (36) kV.
Suitable for installations indoors: mostly in power supply stations and outdoors: in cable ducts, underground, and on cable trays for industries, switch-boards and power stations. Due to the good laying and mechanical characteristics, this cable is suitable when mechanical protection is required or in applications where mechanical damages are expected to occur.
Applicable Standard It is designed and tested to meet or exceed the requirements of IEC 60502-2 standard and/or BS 6622 standard with rated voltage 19/33(36) kV.
Conductor Screen Extruded layer of a cross-linkable semi-conducting compound as a stress control layer
Insulation Extruded layer of cross-linked polyethylene (XLPE).
Insulation Screen Extruded layer of a cross-linkable semi-conducting compound firmly bonded to the insulation.
Metallic Screen Flat plain copper tape helically applied over the insulation screen with suitable overlap. Note: Copper wire screen is optional.
Filler Non-hygroscopic polypropylene filler suitable for the operating temperature of the cable
Bedding Extruded layer of Polyvinyl chloride (PVC).
Armouring Single layer of round galvanized steel wires.
Outer Sheath Extruded layer of Polyvinyl chloride (PVC).
Application
Suitable for installations indoors: mostly in power supply stations and outdoors: in cable ducts, underground, and on cable trays for industries, switch-boards and power stations. Due to the good laying and mechanical characteristics, this cable is suitable when mechanical protection is required or in applications where mechanical damages are expected to occur.
Applicable Standard It is designed and tested to meet or exceed the requirements of IEC 60502-2 standard and/or BS 6622 standard with rated voltage 19/33(36) kV.
English
